home *** CD-ROM | disk | FTP | other *** search
- The A1200 (and A600?) PCMCIA-port has a bug which causes some PCMCIA-cards
- (especially ethernet-cards) not to work after hardreset until you remove
- the card and insert it again while power is on.
-
- It seems as if the A1200 is not generating any reset-signal for the PCMCIA-
- port. The problem is easily solved by soldering a 10uF capacitor between
- CC_RESET and and Vcc. The CC_RESET is active high. The cathode (-) of the
- capacitor should be at CC_RESET.
-
- CC_RESET can be found on pin 5 of Gayle (U5) and Vcc on R715A (the end which
- is near Gayle).
-
- WARNING!
- Although this is a very simple thing to solder please consult a professional
- if you are not good at soldering. I take no responsibility for any damages
- caused by doing anything described in this file.
-
-
- Thanks to
- ---------
- Filip Kopec for making the A1200info series.
-
- Author
- ------
- Pontus Fuchs
- email: pontus.fuchs@bluechoice.se
- homepage: http://foo.birdnet.se/~pf/
-